The Sky Creeper is a mechanic lift that raises the mechanic above the engine and allows him to reach the back of the engine compartment without stressing the lower back and legs.
The power tilt Sky Creeper eliminates back stress by rotating the mechanic from near vertical to horizontal and back. This relieves strain on the back by allowing the mechanic to lay above the work area with both hands free.
The cushioned slide extends from 21 to 40 inches to reach the back of the engine compartment. Covered with “cordura” material, the cushion breathes, and is water and oil resistant.
The unit has 20 inches of vertical adjustments in 4 inch increments. Clearance from the floor to the bottom of the frame is 43 to 63 inches. The frame tilt and height adjustment is powered by a 12 volt recalculating ball ram actuator. Power, for the actuator, is supplied by a 12 volt lawn mower battery (not included) which seldom needs recharging, (2 to 4 times annually) even with daily use.
The tilt and height is actuated by a switch at the end of the cushioned slide, which is easily accessed in any position.
The tool tray swivels out to 40 inches and is 8x14x1½ inches deep. A magnetic trouble light can be easily attached to the tool tray. (Light not included)
© Copyright Sky Creeper 2008. All rights reserved.